Crystal-clear 1080p HD video, infrared night vision and secure cloud recording make the Comporium Indoor Wi-Fi Security Camera from Alarm.com ideal for indoor video monitoring. With its compact design and flexible mounting options, the Indoor Wi-Fi Security is easy to install – whether mounted on a wall or ceiling or simply placed on a shelf.
Specifications
- HD 1080p video
- IR night vision
- Wide dynamic range (WDR)
- Two-Way Audio
- Minimum Bandwidth Requirements
- Without Two-Way Audio: 0.5 Mbps
- With Two-Way Audio: 1 Mbps
View the Alarm.com Knowledge Base for more in-depth support details.
Installation Guide
- From the Alarm.com Mobile App, tap the hamburger menu (3 stacked lines) in the upper left hand corner.
- Choose "Add Devices"
- Choose "Video Camera"
- Choose "ADC-V515" and follow the prompts
Download the installation guide.
Refer to the Alarm.com Knowledge Base for more information
Troubleshooting Your Camera
View our Video Troubleshooting Guide if you are having trouble viewing your camera.
LED Guide
|
LED Pattern |
Status |
Descritpion |
|
Green | Solid |
Connected To The Internet | Local Network and internet connection with Alarm.com IP |
|
Green | Flashing |
Local Network Connection | Local network connection with local IP address, no internet. |
|
Red | Solid |
Power On, or No Network Connection | Power on, system booting up typically 60-90 seconds. If solid red for longer than 60-90 seconds, then there is no local or Internet connection. |
|
Red | Flashing |
Camera Powering On or Updating Firmware | Camera is powering on, or a firmware update is in progress. |
|
Blue | Flashing |
WPS Mode | WPS mode is active. To enter WPS mode, press and hold the WPS button for about three seconds. |
|
White | Flashing |
AP Mode | Wi-Fi access point (AP) mode is active. To enter AP mode, press and hold the WPS button for about six seconds. |
|
Red & Green | Flashing |
Factory Reset | The camera is restoring to factory default settings. Caution: If the camera is already installed, it may need to be removed from the Alarm.com account and re-added after a factory reset. To perform a factory reset, press and hold the reset button for about 10-15 seconds. |