Designed specifically to work with the Alarm.com hosted video service, the ADC-SVR122 Stream Video Recorder provides a 24x7 professional local video storage solution. With the Stream Video Recorder, you can connect up to eight Alarm.com video cameras for continuous recording.
Specifications
- 1 TB Harddrive
- Suports Up To 8 Cameras
- HDMI and USB Ports for Local Control
- Minimum Bandwidth Requirements: 2 Mbps
View the Alarm.com Knowledge Base for more details support information.
Installation Guide
- Use an ethernet cable to connect the SVR to your network router.
- Connect the device’s AC power adapter and plug it into a non-switched outlet.
- Allow a few minutes for the SVR and router to connect. When the status LED on the front of the SVR is solid green, the connection is complete.
- From a browser, go to www.alarm.com/addcamera
- Follow the on-screen instructions to add and set up the SVR.
Download the installation guide.
Refer to the Alarm.com Knowledge Base for more information.
Troubleshooting Your Camera
View our Video Troubleshooting Guide if you are having trouble viewing your camera.
LED Guide
LED Location |
LED Status |
Descritpion |
Front of SVR |
Green | Solid |
Internet connection. Local network and internet connection are active. |
Green | Flashing |
Local network connection. Local connection only, no internet. | |
Red | Flashing |
SVR is booting up or there is no connection to the any network. | |
Red | Solid |
Cameras not recording or hard drive error. | |
Red/Green | Flashing |
Factory Reset. Caution: This restores factory-default settings to the device. If already installed, the device may need to be removed from the Alarm.com account and re-added after a factory reset. To perform a factory reset, push the Reset button and release when flashing Green and Red(about 15 seconds). | |
Back of SVR |
Green | Solid |
SVR harddrive is operating normally |
Green | Flashing |
Harddrive is full. Normal operation, oldest footage is being deleted. | |
Red | Solid |
Harddrive error. | |
Red | Flashing (1 second) |
Harddrive configuration error. | |
Red | Flashing (2 seconds) |
Harddrive is disconnected |