Flood Sensor

The wireless Flood Detector from Comporium senses the presence of water prompting advance warning of potential flooding.  The transmitter is installed at a higher level on the wall with the probe located at floor level or a desired height.  In the event that there is a water leak, the probe will detect the moisture and deliver the information to the transmitter.

Specifications

• Dimensions:  3-3/16"x1-1/4"x1" (LxWxD)
• Battery Life:  8 years
• Battery Type:  One (1) 3V CR123A Lithium Battery
• Weight:  1.9oz
• Operating Temperature:  14°F to 131°F 

Installation Guide

• Open the sensor by using the push tab on the bottom of the sensor and remove the battery pull tab from the sensor. 
• From the Interactive Touchscreen, navigate to Settings by swiping down from the top of the screen. 
• From Settings, navigate to Advanced Settings > Enter your Master Code
• If you do not know your master code, from the Alarm.com mobile app, navigate to Users and choose the user labeled “Master”. 
• Tap “Panels” to view the 4-digit master code. 
• Tap Security Sensors
• Tap Auto Learn Sensors
• Activate your sensor by opening and closing the case to create a tamper. 
• Once the sensor is recognized change the source type to Power G (if it is not automatically changed) and rename your sensor.
• Download the Installation Guide